I am really baffled that one of my movie files doesn't seem to like Samsung HDDs and I was wondering if certain data patterns can cause or at least favor data corruption over time.
It first started when I tried to read back some MKVs from an external 3.5" Samsung HDD. All files copied fine, except this particular file that caused the drive to slow down and click every few seconds. After about two minutes, Windows gave up copying telling me that the source file could not be read. I assumed a corrupt drive and viewed the SMART parameters to find that pending sector count was no longer 0 and offline uncorrectable error count was high. The extended SMART self-test was aborted by the drive telling me that a surface error occurred.I had the same data stored on an identical Samsung HDD and on a WD portable HDD. I tried to copy from the second Samsung HDD and the same file caused errors. Exactly the same symptoms as with the first Samsung HDD. Clicking noise, aborted copy, current pending sector count was 4, high offline uncorrectable error count. Fortunately, I was able to copy the file from the WD drive without trouble.Having two broken Samsung HDDs, I wanted to throw them away, but before doing so, wipe them to be sure all data is gone. I used DBAN to erase the disk surface with zeros and no write errors were reported. I checked the SMART status of the disks and current pending sector count was back at 0, offline uncorrectable remained the same, but after cycling the power, it was at 0. I used a data integrity tool called H2testw to check the disks and even after multiple runs, the written data (occupying the whole disk size) was read back fine and without errors. I then copied the MKVs to the Samsung HDDs and wanted to copy back the files to check if everything went well, but then Windows aborted the copy back from the Samsung disks at the same file that was causing trouble the first time.
So, is this all just a big coincidence or how come one file can cause a drive to fail?